Step 1: Decide What Coin You Would Like To Wear
If you are reading this article, I assume you already have a mint in mind. I recommend mercury dimes and small aureate cents in jewelry ! They are humble adequate to be inconspicuous and not excessively flashy. I wear my mercury dime necklace casual !
today I will be making a dollar coin necklace. I was caught between the American Innovation Series Telephone Coin or a Susan B. Anthony Dollar coin. I decided on the Telephone Coin because I think it looked better in contrast to the silver color of the bezel.
I decided on the newer Innovation Dollar Coin.
Step 2: Find A Correctly Sized Bezel
A bezel is the resound that holds your coin in invest. There are two main types of bezels and how they secure your coins. One type uses prong in the back to keep the coin in identify, the early is a screw-top bezel which uses tension to keep the coin in put .
Screw Bezel :
Screw Bezel Prong Bezel :
One prong turned down. If you are using a valuable coin, decidedly pick a bezel that does not use prongs, as the prongs will dig into the coin and diminish its value .
I decided to make a necklace out of a cheap dollar mint, so I was not worried about the character of bezel I used. here is the bezel I decided on, the Sabrina Silver 26mm Diamond Cut :
Sabrina Silver Diamond Cut Bezel. Step 3: Center the Coin in the Bezel
Make surely you properly center the mint in the bezel ! It is very hard to change after it is secured. I recommend putting it in plaza and then checking in a mirror to see how you like it .
Where I centered the coin. Step 4: Secure the Coin
For this prong-type bezel, you will need to move the prongs without scratching the front of the bezel. The best way to do this is to put a fold musical composition of paper or fabric on the front of the mint to prevent scratches .
This way, you can push on the front of the coin with your pliers and not cause any damage to the open of the coin .
How to push in tabs on a coin bezel. Make certain all the prongs/tabs are tightly secured, you do not want the coin to jiggle free.
Step 5: Attach Your Necklace
The biggest footstep here is to make certain the necklace lays flat against your neck when it is wear. For some bezels, that may mean using a jump rather of directly attaching the chain to the bezel .
Finished Dollar Coin Necklace There are many unlike types of chains you could use. For my dollar coin necklace, I decided to use a regular nickel-plated chain since I had one on hand. For my mercury dime necklace, since it is a valuable coin, I opted to buy a .925 sterling silver medal chain .
Step 6: Wear It!
Congratulations ! You did it !
Mercury Dime Necklace I made this Mercury dime necklace 2 years ago and have worn it everyday ! A fortune of people have complimented me on it .
The hardest character about making coin jewelry is normally gathering the appropriately sized materials .
Below I will attach a tilt of my recommend products. The dollar coin items will be cheaper, since the mint is normally cheaper. I will recommend nicer/more valuable material for a Mercury dime bag necklace, because I like the way silver and gold-filling look .
You can make either one as cheap, or adenine expensive as you would like, feel unblock to message me for intersection recommendations !
Here is a list of what I would recommend for making your own dollar coin necklace:
- 26mm Bezel
- Sterling Silver Chain (Make sure to check desired length. I like 16-20 inches)
Here is a list of recommended products for a mercury dime necklace:
- Gold Filled Bezel
- Sterling Silver Figaro Chain (Figaro is the chain type I have. It is gorgeous!)
- Small Screwdriver (Just need it for the small screw on the bezel. I used a kitchen knife for mine lol)
Do you wear coin jewelry? Share a comment and vote in our poll below!
I am an Amazon Affiliate, so I earn a commission on sales made through my links. This does not increase the price of any detail linked through my locate. My main finish is to inform .