Lisa Yang Jewelry – Free Projects and Patterns: How to Make Decorative Jewelry Knots: Josephine Knot and Double Coin Knot

I did my research, like I always do, and wrote my tutorial – only to figure out just before my publishing deadline that the tutorial I wrote was for the very similar, almost identical, vaguely different Josephine Knot. A bit frustrating – but I still had time to re-shoot my pictures and make the deadline.  I figured since I already did the tutorial for the Jospehine Knot, I may as well share it here, as well as what the difference is.

To be fair, both knots are very similar – a graceful looping knot that can be tied for a variety of purposes using many different materials. One thing about knots, is that they are used in many different contexts.

In a practical sense, they are used to join cords, or tie something down – sailing or fishing come to mind as useful examples. But they can also be used decoratively – chinese knotting and macrame .  Of course, the knots go by different names for each of these purposes.

In any event, I won’t repeat all of my exhaustive knot research, it’s ‘knot’ that interesting (ha ha!), but to boil it all down, the Double Coin Knot and the Josephine Knot are pretty darn near the same thing – with the difference being that one is tied in the center of a cord (the double coin knot) and the other is tied using two parallel cords – in other words tying two cords together.

Here is the Double Coin Knot.

And the Josephine Knot.

Comparing the two, you’ll see that the Double Coin Knot has an extra loop in the middle – which results from tying the knot in the center of the cord.  But here’s something interesting…  Use that center to hang a long pendant, and the double coin knot looks suspiciously like the Josephine knot.

Practically speaking, the double coin knot is a great decorative knot for earrings or to hang a pendant. The Josephine knot is a good decorative knot when you are joining two cords. Both look really nice when tied using more than one cord (see the red/blue Double Coin Knot above) – not necessarily with two different color cords like the tutorial below.

To make a Josephine knot, start with two parallel cords.  Two different color cords and working with larger sized cord make learning this much easier. Also, because there’s a lot of looping, having long pieces of cord make it much easier to slide the cord into the tight spaces.
.
Using the cord on the right side (red), make a loop as shown over the left (blue) cord.  I’ll start off giving instructions with the side of the cord, but eventually use the colors, because the cords obviously change places. The references below to left or right is the cord’s starting position.

Using the left (blue) cord, loop over the  red (right) cord end.

Continue looping around, bringing the blue (left cord) under the red (right) cord.

Slide the end of the blue (left) cord over the right cord loop.

Then slide the blue (left) cord under itself.

And finally, bring the cord over the red (right) cord.  So, in summary, those steps were right loop, left loop, over, under, over, under, over, pull tight.  I actually repeat that to myself as I’m tying this – so it may help someone else too…

Now gently pull and arrange and finagle the loops until you have a nice even knot. This part takes more work than you would imagine. Especially since pulling on the right bottom cord tightens the left top side of the knot. It takes a little reverse thinking to get used to making adjustments.

Both of these knots work well using stiff cords with body, like leather, or even seed beads on beading wire. If the knots get pulled on a lot, they can get pulled out of shape, so they may need to have the cords glued into place.

You can keep up with my latest posts by following me on social media or signing up for emails. 

cosmetic knots are always handy to know for jewelry make. After all, that ‘s reasonably much the whole basis of macrame – making cosmetic knots in a assortment of patterns with different materials. last calendar month, my tutorial for The Spruce Crafts was how to make a chinese Double Coin Knot I did my research, like I constantly do, and wrote my tutorial – only to figure out good before my print deadline that the tutorial I wrote was for the very similar, about identical, vaguely different Josephine Knot. A spot frustrating – but I still had time to re-shoot my pictures and make the deadline. I figured since I already did the tutorial for the Jospehine Knot, I may vitamin a well share it here, angstrom well as what the dispute is.To be fair, both knots are very exchangeable – a graceful loop knot that can be tied for a diverseness of purposes using many unlike materials. One matter about knots, is that they are used in many different contexts.In a hardheaded sense, they are used to join cords, or tie something down – sail or fish come to mind as useful examples. But they can besides be used decoratively – chinese knot and macrame. Of course, the knots go by different names for each of these purposes.In any event, I wo n’t repeat all of my exhaustive knot research, it ‘s ‘knot ‘ that interesting ( hour angle hour angle ! ), but to boil it all down, the Double Coin Knot and the Josephine Knot are pretty mend near the like thing – with the dispute being that one is tied in the plaza of a cord ( the double coin knot ) and the other is tied using two parallel cords – in other words tying two cords together.Here is the double Coin Knot.And the Josephine Knot.Comparing the two, you ‘ll see that the Double Coin Knot has an extra loop in the center – which results from tying the knot in the center of the cord. But here ‘s something interesting … Use that center to hang a long pendant, and the double coin knot looks suspiciously like the Josephine knot.Practically speaking, the double mint ravel is a great cosmetic nautical mile for earrings or to hang a chandelier. The Josephine slub is a good cosmetic slub when you are joining two cords. Both look very courteous when tied using more than one cord ( see the red/blue Double Coin Knot above ) – not necessarily with two different color cords like the tutorial below.To make a Josephine knot, start with two parallel cords. Two different color cords and working with larger sized cord make learning this much easier. besides, because there ‘s a lot of loop, having long pieces of cord make it much easier to slide the cord into the tight spaces.Using the cord on the right side ( red ), make a loop as shown over the exit ( blue ) cord. I ‘ll start off giving instructions with the slope of the cord, but finally use the colors, because the cords obviously change places. The references below to left or right is the cord ‘s starting position.Using the left ( blue ) cord, coil over the loss ( right ) cord end.Continue looping round, bringing the blue ( left field cord ) under the red ( right ) cord.Slide the end of the gloomy ( left ) cord over the right cord loop.Then slide the blue ( left ) cord under itself.And last, bring the cord over the bolshevik ( correctly ) cord. so, in compendious, those steps were right loop, left cringle, over, under, over, under, over, pull tight. I actually repeat that to myself as I ‘m tying this – so it may help person else besides … immediately lightly pull and format and finagle the loops until you have a dainty even knot. This part takes more work than you would imagine. specially since pulling on the properly bottom cord tightens the bequeath lead side of the knot. It takes a little rearward thinking to get used to making adjustments.Both of these knots work well using firm cords with body, like leather, or even seed beads on beading wire. If the knots get pulled on a lot, they can get pulled out of shape, so they may need to have the cords glued into place.You can keep up with my latest posts by following me on social media or signing up for emails. Sign up here

beginning : https://ontopwiki.com
Category : Finance

Post navigation

Leave a Comment

Trả lời

Email của bạn sẽ không được hiển thị công khai.