Canadian 1 Dollar Coin Major Varieties

1935 Reverse Varieties

1937-1952 “HP” Obverse Varieties

The initials of obverse designer (T.H. Paget) are located to the right side of the truncation of King George Vi’s effigy. Many times between 1937 and 1952 the initials began to wear off
the dies so they had to be re-punched.

The initials of obverse architect ( T.H. Paget ) are located to the correct side of the shortness of King George Vi ‘s effigy. many times between 1937 and 1952 the initials began to wear off the dies so they had to be re-punched .

1945 Reverse Varieties

1946 Reverse Varieties

1947 One Dollar Reverse Varieties

1950-1956 Reverse Varieties

The Voyageur design should include four water lines at each end of the canoe.
Between 1950 and 1956 the reverse dies were polished and modified several times. As a result some or all of these water lines were partially or completely removed.

The Voyageur blueprint should include four water system lines at each end of the canoe.Between 1950 and 1956 the reverse dies were polished and modified respective times. As a leave some or all of these water lines were partially or wholly removed .

 

1953 Obverse Varieties
Because of die polishing a variety exists in 1953 coins where the shoulder strap of the Queen’s dress was almost completely polished away and cannot be easily seen.
This variant is referred to as “No Shoulder Fold”:

Because of die polishing a assortment exists in 1953 coins where the shoulder strap of the Queen ‘s dress was about completely polished away and can not be well seen. This random variable is referred to as “ No Shoulder Fold ” :

1957 Reverse Varieties

The Voyageur design should include four water lines at each end of the canoe.
1957 the reverse dies were polished and modified several times. As a result some of these water lines were partially or completely removed, leaving only one waterline obviously present.

The Voyageur design should include four water lines at each end of the canoe.1957 the revoke dies were polished and modified respective times. As a solution some of these water lines were partially or wholly removed, leaving merely one waterline obviously award.

 

1964 Reverse Varieties

There are two varieties of the 1964 silver dollar. If you look above the dot between the “C” in Quebec and the “N” in Charlottown you will see the designer’s initials “T.S.”
On some coins the dot between T and S is missing. This is called the “No Dot” variety.


There are two varieties of the 1964 silver dollar. If you look above the dot between the “ C ” in Quebec and the “ N ” in Charlottown you will see the designer ‘s initials “ T.S. “ On some coins the acid between T and S is missing. This is called the “ No Dot ” variety .

1965 Obverse Varieties

Manufacturing problems with the Queen’s new effigy led to a number of changes to the 1965 die sets:

The first die design used was the “Small Beads” variety. That design led to a very poor die life, so it was fine tuned.

This obverse was paired with both reverse varieties to produce the first two overall varieties of the coin:
– Type 1: (SB-P5) Small Beads Obv, Pointed 5 Rev
– Type 2: (SB-B5) Small Beads Obv, Blunt 5 Rev

A single die set was then produced with “Medium Beads” and that design proved that an obverse with the field sloping up at the edge was preferred.

This obverse was paired with only one reverse variety to produce the fifth overall variety of the coin:
– Type 5: (MB-P5) Medium Beads Obv, Pointed 5 Rev

(Note this type may not seem to be numbered in sequence. This is because it was the last variety to be discovered)

A final “Large Beads” design was created that incorporated more fine tuning.

This obverse was paired with both reverse varieties to produce two overall varieties of the coin:
– Type 3: (LB-B5) Large Beads Obv, Blunt 5 Rev
– Type 4: (LB-P5) Large Beads Obv, Pointed 5 Rev

Manufacturing problems with the Queen ‘s new effigy led to a phone number of changes to the 1965 die sets : The beginning fail design used was the “ small Beads ” variety show. That design led to a very inadequate die life, so it was fine tuned.This obverse was paired with both reverse varieties to produce the first two overall varieties of the coin : – type 1 : ( SB-P5 ) Small Beads Obv, Pointed 5 Rev- type 2 : ( SB-B5 ) Small Beads Obv, Blunt 5 RevA single die set was then produced with “ Medium Beads ” and that purpose proved that an obverse with the airfield sloping up at the boundary was preferred.This obverse was paired with entirely one reversion variety to produce the fifth overall variety show of the coin : – type 5 : ( MB-P5 ) Medium Beads Obv, Pointed 5 Rev ( Note this type may not seem to be numbered in sequence. This is because it was the last assortment to be discovered ) A concluding “ boastfully Beads ” design was created that incorporated more fine tuning.This obverse was paired with both revoke varieties to produce two overall varieties of the coin : – type 3 : ( LB-B5 ) Large Beads Obv, Blunt 5 Rev- Type 4 : ( LB-P5 ) Large Beads Obv, Pointed 5 Rev

1965 Reverse Varieties

In 1965 two varieties of reverse were manufactured (Pointed 5 and Blunt 5):


In 1965 two varieties of reverse were manufactured ( Pointed 5 and Blunt 5 ) :

1966 Obverse Varieties

In 1966 two varieties of obverse were manufactured (Small Beads and Large Beads):


In 1966 two varieties of obverse were manufactured ( Small Beads and Large Beads ) :

1967 Obverse Varieties

In 1967 there was an obvious problem keeping the dies locked into position. As a result one or both dies began to rotate in the press and large number of the resulting struck coins exhibit one side rotated
with respect to the other. The most popular term for these coins is the “Diving Goose”:


In 1967 there was an obvious trouble keeping the dies locked into placement. As a resultant role one or both dies began to rotate in the press and big total of the resulting hit coins exhibit one side rotated with regard to the early. The most popular terminus for these coins is the “ Diving Goose ” :

1968 Reverse “Island” Varieties

A major shift occured in 1968 when the composition of 1 dollar coins was changed from a silver alloy to 100% nickel. As a result of this decision the one dollar dies had to
go through a major transformation to reduce the displacement of the much harder nickel to accept the images on both sides without shortening the life of the dies.
The diameter was reduced from 36mm to 32mm and the relief was lowered a bit.

There are three different categories of varieties found on 1968 1 dollar coins: Island size, horizon lines and date doubling. The next three graphics detail each type of variety.

The Voyageur design should include the tip of the island to the right of the canoe. There are three varieties related to the size or presence of this island on 1968 1 dollar coins:

A major switch occured in 1968 when the composition of 1 dollar coins was changed from a flatware debase to 100 % nickel. As a result of this decision the one dollar dies had to go through a major transformation to reduce the supplanting of the much hard nickel to accept the images on both sides without shortening the life of the dies. The diameter was reduced from 36mm to 32mm and the easing was lowered a bit.There are three different categories of varieties found on 1968 1 dollar coins : Island size, horizon lines and date double over. The adjacent three graphics detail each type of variety.The Voyageur blueprint should include the tiptoe of the island to the right of the canoe. There are three varieties related to the size or presence of this island on 1968 1 dollar coins :

1968 “Horizon Line” Reverse Varieties

In 1968 three varieties of reverse were used – the normal (intended) type, and two varieties created by die polishing and re-engraving:


In 1968 three varieties of change by reversal were used – the convention ( intended ) character, and two varieties created by die polish and re-engraving :

1968 “Doubling” Reverse Varieties

In 1968 two varieties of reverse were used – the normal (intended) type, and a variety created by re-punching the “CANADA”, “DOLLAR” and the last two digits of the date:


In 1968 two varieties of turn back were used – the normal ( intended ) type, and a variety created by re-punching the “ CANADA ”, “ dollar ” and the last two digits of the date :

1969 Reverse Varieties

1974 Reverse Varieties

This graphic shows the differences between the four major varieties of the 1974 Winnipeg Centennial 1 dollar coin.

There are a large number of minor varieties which have been discovered and attributed, but not necessarily acknowledged by the catalogue publishers and grading companies.
Thanks to the diligent work of collector and numismatic researcher Ken Potter a VERY thorough list of all major and minor variants and a good explanation of how these varieties
were created can be found at the following web page:

The Attribution Guide to 1974 Canadian Nickel Dollar Varieties by Ken Potter — NLG

This graphic shows the differences between the four major varieties of the 1974 Winnipeg Centennial 1 dollar coin.There are a big total of minor varieties which have been discovered and attributed, but not necessarily acknowledged by the catalogue publishers and grading companies. Thanks to the diligent exploit of collector and numismatic research worker Ken Potter a VERY exhaustive list of all major and minor variants and a good explanation of how these varieties were created can be found at the following network page :

1975 Obverse Varieties

1976 Obverse Varieties

1977 Varieties

1982 Obverse Varieties

source : https://ontopwiki.com
Category : Finance

Post navigation

Leave a Comment

Trả lời

Email của bạn sẽ không được hiển thị công khai.